From 8ab1155a0723c02a717267e34ae823f118f40e53 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Fri, 21 Feb 2020 05:28:24 +0000 Subject: [PATCH 081/101] FROMLIST: arm64: dts: meson: gxl-s905x-khadas-vim: add thermal zones Add thermal zones to the VIM1 board so that a cooling fan can be driven using the i2c interface. Zone config is copied from the VIM2. Suggested-by: Nick Xie Signed-off-by: Christian Hewitt --- .../amlogic/meson-gxl-s905x-khadas-vim.dts | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 440bc23c7342..2c198c4212b2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -6,6 +6,7 @@ /dts-v1/; #include +#include #include "meson-gxl-s905x-p212.dtsi" @@ -63,6 +64,39 @@ }; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + + thermal-sensors = <&scpi_sensors 0>; + + trips { + cpu_alert0: cpu-alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + + cpu_alert1: cpu-alert1 { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; &cec_AO { @@ -72,6 +106,22 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; -- 2.17.1