From 8b3f4d8ece446d1b608525c9057ec902977964e7 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Wed, 31 Oct 2018 20:43:26 -0700 Subject: [PATCH 097/170] arm64:dts: sun50i-a64-pinebook enable Bluetooth Pinebook has an RTL8723CS WiFi + BT chip, BT is connected to UART1 and uses PL4 as BT reset, PL5 as device wake GPIO, PL6 as host wake GPIO the I2C controlling signals are connected to R_I2C bus. Enable it in the device tree. Signed-off-by: Vasily Khoruzhick --- .../boot/dts/allwinner/sun50i-a64-pinebook.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 63571df24..80f1ef241 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -406,6 +406,20 @@ &uart0 { status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723cs-bt"; + reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */ + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + firmware-postfix = "pinebook"; + }; +}; + &usb_otg { dr_mode = "host"; }; -- 2.35.3