From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: wuweidong <625769020@qq.com> Date: Mon, 27 Nov 2017 10:23:51 +0800 Subject: arm64:dts: Add sun50i-h5-nanopi-k1-plus device --- arch/arm64/boot/dts/allwinner/Makefile | 1 + arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts | 396 ++++++++++ 2 files changed, 397 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 358efa5d6abc..29c44ac36599 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-k1-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts new file mode 100644 index 000000000000..b7045a9efab5 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts @@ -0,0 +1,396 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" + +#include +#include +#include + +/ { + model = "FriendlyElec NanoPi K1 Plus"; + compatible = "friendlyelec,nanopi-k1-plus", "allwinner,sun50i-h5"; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "nanopi:green:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + pwr { + label = "nanopi:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + }; + + r-gpio-keys { + compatible = "gpio-keys"; + + sw4 { + label = "sw4"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_nanopi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_npi>; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + post-power-on-delay-ms = <200>; + }; + + rfkill_bt { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pwr_pin>; + reset-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + clocks = <&osc32k>; + clock-frequency = <32768>; + rfkill-name = "sunxi-bt"; + rfkill-type = "bluetooth"; + }; + + pcm5102a: pcm5102a-codec { + #sound-dai-cells = <0>; + compatible = "ti,pcm5102a"; + status = "disabled"; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + local-mac-address = [ 00 00 00 00 00 00 ]; + allwinner,leds-active-low; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&mmc2 { + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + boot_device = <0>; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + drive-strength = <40>; + /* eMMC is missing pull-ups */ + bias-pull-up; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + + +&pio { + leds_npi: led_pins@0 { + pins = "PA10"; + function = "gpio_out"; + }; + gmac_power_pin_nanopi: gmac_power_pin@0 { + pins = "PD6"; + function = "gpio_out"; + }; + bt_pwr_pin: bt_pwr_pin@0 { + pins = "PG13"; + function = "gpio_out"; + }; + spi0_cs_pins: spi0_cs_pins { + pins = "PC3", "PA6"; + function = "gpio_out"; + }; +}; +&r_pio { + leds_r_npi: led_pins@0 { + pins = "PL10"; + function = "gpio_out"; + }; + vdd_cpux_r_npi: regulator_pins@0 { + allwinner,pins = "PL6"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + wifi_en_npi: wifi_en_pin { + pins = "PL7"; + function = "gpio_out"; + }; +}; +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + + +&r_i2c { + status = "okay"; + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + /* + * The datasheet uses 1.1V as the minimum value of VDD-CPUX, + * however both the Armbian DVFS table and the official one + * have operating points with voltage under 1.1V, and both + * DVFS table are known to work properly at the lowest + * operating point. + * + * Use 1.0V as the minimum voltage instead. + */ + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&spi0 { + status = "okay"; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <10000000>; + status = "okay"; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "env"; + reg = <0x100000 0x100000>; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + status = "okay"; +}; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A ports' VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&i2s0 { + sound-dai = <&pcm5102a>; + status = "disabled"; +}; \ No newline at end of file -- Armbian