From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
Date: Sat, 9 Nov 2019 23:55:48 +0100
Subject: ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor

The board has a vibrator mottor. Hook it to the input subsystem.

According to the PMIC specification, LDO needs to be enabled (value 0b11)
to achieve the specified max driving current of 150mA. We can't drive
the motor with just GPIO mode.

In GPIO mode the chip is probably just using the regular CMOS logic
output circuitry (typically limited to around 20-35mA, but not specified
in this datasheet).

Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
 arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
index 484d08ae17ec..07d01d251bbb 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -99,6 +99,11 @@ panel_input: endpoint {
 		};
 	};
 
+	vibrator {
+		compatible = "gpio-vibrator";
+		vcc-supply = <&reg_ldo_io1>;
+	};
+
 	reg_gps: reg-gps {
 		compatible = "regulator-fixed";
 		regulator-name = "gps";
-- 
Armbian

