From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Jianhua Lu Date: Sat, 18 Mar 2023 22:26:22 +0800 Subject: arm64: dts: qcom: sm8250-xiaomi-elish: Add sound support --- arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 232 ++++++++++ 1 file changed, 232 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 2da3820ddbda..45775428cb92 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -6,6 +6,8 @@ #include #include #include +#include +#include #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -529,6 +531,152 @@ fuel-gauge@55 { }; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + cs35l41_brh: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "BRH"; + #sound-dai-cells = <1>; + }; + + cs35l41_blh: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "BLH"; + #sound-dai-cells = <1>; + }; + + cs35l41_brl: speaker-amp@42 { + compatible = "cirrus,cs35l41"; + reg = <0x42>; + interrupt-parent = <&tlmm>; + interrupts = <100 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "BRL"; + #sound-dai-cells = <1>; + }; + + cs35l41_bll: speaker-amp@43 { + compatible = "cirrus,cs35l41"; + reg = <0x43>; + interrupt-parent = <&tlmm>; + interrupts = <126 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "BLL"; + #sound-dai-cells = <1>; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + status = "okay"; + + cs35l41_trh: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "TRH"; + #sound-dai-cells = <1>; + }; + + cs35l41_tlh: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 78 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "TLH"; + #sound-dai-cells = <1>; + }; + + cs35l41_tll: speaker-amp@42 { + compatible = "cirrus,cs35l41"; + reg = <0x42>; + interrupt-parent = <&tlmm>; + interrupts = <112 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "TLL"; + #sound-dai-cells = <1>; + }; + + cs35l41_trl: speaker-amp@43 { + compatible = "cirrus,cs35l41"; + reg = <0x43>; + interrupt-parent = <&tlmm>; + interrupts = <129 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 144 GPIO_ACTIVE_HIGH>; + cirrus,boost-type = <0>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + sound-name-prefix = "TRL"; + #sound-dai-cells = <1>; + }; +}; + &i2c11 { clock-frequency = <400000>; status = "okay"; @@ -684,11 +832,63 @@ &qupv3_id_2 { status = "okay"; }; +&q6afedai { + dai@56 { + reg = ; + qcom,tdm-sync-mode = <0>; + qcom,tdm-sync-src = <1>; + qcom,tdm-data-out = <0>; + qcom,tdm-invert-sync = <1>; + qcom,tdm-data-delay = <1>; + qcom,tdm-data-align = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; +}; + &slpi { firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn"; status = "disabled"; }; +&sound { + compatible = "qcom,sm8250-sndcard"; + model = "Xiaomi Mi Pad 5 Pro"; + pinctrl-names = "default"; + pinctrl-0 = <&tert_tdm_active>; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + speaker-dai-link { + link-name = "Tertiary TDM Playback"; + + cpu { + sound-dai = <&q6afedai TERTIARY_TDM_RX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&cs35l41_tlh 0>, <&cs35l41_tll 0>, + <&cs35l41_trh 0>, <&cs35l41_trl 0>, + <&cs35l41_blh 0>, <&cs35l41_bll 0>, + <&cs35l41_brh 0>, <&cs35l41_brl 0>; + }; + }; +}; + &spi4 { status = "okay"; pinctrl-names = "default"; @@ -735,6 +935,38 @@ wlan-en-pins { bias-pull-up; }; }; + + tert_tdm_active: tert-tdm-active-state { + sck-pins { + pins = "gpio133"; + function = "mi2s2_sck"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + din-pins { + pins = "gpio134"; + function = "mi2s2_data0"; + drive-strength = <8>; + bias-disable; + }; + + ws-pins { + pins = "gpio135"; + function = "mi2s2_ws"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + dout-pins { + pins = "gpio137"; + function = "mi2s2_data1"; + drive-strength = <8>; + bias-disable; + }; + }; }; &uart6 { -- Armbian