diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index cf4f4ae8..3475d564 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -107,6 +107,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \ rk3308-roc-cc.dtb dtb-$(CONFIG_ROCKCHIP_RK3328) += \ + rk3318-box.dtb \ rk3328-evb.dtb \ rk3328-nanopi-r2-rev00.dtb \ rk3328-orangepi-r1-plus.dtb \ diff --git a/arch/arm/dts/rk3318-box-u-boot.dtsi b/arch/arm/dts/rk3318-box-u-boot.dtsi new file mode 100644 index 00000000..e9ab052c --- /dev/null +++ b/arch/arm/dts/rk3318-box-u-boot.dtsi @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2020 Armbian project (jock) + */ + +#include "rk3328-u-boot.dtsi" +#include "rk3328-sdram-ddr3-666.dtsi" + +/ { + chosen { + u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdmmc_ext, &emmc; + }; + +}; + +&gpio0 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&sdmmc0m1_pin { + u-boot,dm-pre-reloc; +}; + +&pcfg_pull_up_4ma { + u-boot,dm-pre-reloc; +}; + +&usb_host0_xhci { + vbus-supply = <&vcc_host_vbus>; + status = "okay"; +}; + +&vcc_sd { + u-boot,dm-pre-reloc; +}; + +&sdmmc { + u-boot,dm-pre-reloc; +}; + +&sdio { + status="disabled"; +}; + +&emmc { + u-boot,dm-pre-reloc; +}; + +&sdmmc_ext { + u-boot,dm-pre-reloc; +}; + +&uart2 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + + sdmmc0-1 { + sdmmc0m1_pwren: sdmmc0m1-pwren { + rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0m1_pin: sdmmc0m1-pin { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + +}; + +&vdd_arm { + regulator-init-microvolt = <1200000>; +}; diff --git a/arch/arm/dts/rk3318-box.dts b/arch/arm/dts/rk3318-box.dts new file mode 100644 index 00000000..d4678c7c --- /dev/null +++ b/arch/arm/dts/rk3318-box.dts @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Armbian project (jock) + */ + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Rockchip RK3318 BOX"; + compatible = "rockchip,rk3318-box", "rockchip,rk3328-box", "rockchip,rk3328"; + + aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; + mmc3 = &sdmmc_ext; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + linux,code = <0x168>; /*KEY_VENDOR*/ + press-threshold-microvolt = <17000>; + }; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + #clock-cells = <0>; + }; + + gmac_clkin: gmac-clkin { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0x00>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <0x01>; + #size-cells = <0x00>; + + vcc_18: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vccio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_io: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vccio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_pin>; + regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + + /* + * USB3 vbus + */ + vcc_host_vbus: vcc-host-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_vbus"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sys>; + }; + + /* + * USB2 OTG vbus + */ + vcc_otg_vbus: vcc-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb20_host_drv>; + regulator-name = "vcc_otg_vbus"; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sys>; + }; + + vdd_arm: vdd-arm { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_arm"; + regulator-init-microvolt = <1000000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + + }; + + vdd_logic: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 5000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-init-microvolt = <1000000>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <12500>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&working_led>; + + working { + gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + default-state = "on"; + }; + + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + + fd628_dev { + compatible = "fd628_dev"; + fd628_gpio_clk = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + fd628_gpio_dat = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + analog-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "ANALOG"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "HDMI"; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + +}; + +&codec { + status = "okay"; + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +/* +&dmc { + center-supply = <&vdd_logic>; + status = "disabled"; +}; +*/ + +&display_subsystem { + status = "okay"; +}; + +&emmc { + + supports-emmc; + no-sdio; + no-sd; + cap-mmc-highspeed; + mmc-ddr-1_8v; + disable-wp; + non-removable; + bus-width = <8>; + num-slots = <0x01>; + + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18>; + + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + supports-sd; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + supports-sdio; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + brcm,drive-strength = <4>; + interrupt-parent = <&gpio1>; + interrupt-names = "host_wake"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_host_wake>; + }; + +}; + +&sdmmc_ext { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0ext_clk &sdmmc0ext_cmd &sdmmc0ext_dectn &sdmmc0ext_bus4>; + supports-sd; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&gmac2phy { + phy-supply = <&vcc_phy>; + + phy-mode = "rmii"; + + clock_in_out = "output"; + assigned-clocks = <&cru SCLK_MAC2PHY>; + assigned-clock-rate = <50000000>; + assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; + tx_delay = <0x30>; + rx_delay = <0x10>; + + status = "okay"; + +}; + +&gpu { + status = "okay"; + mali-supply = <&vdd_logic>; +}; + +/* +&h265e { + status = "okay"; +}; +*/ + +&h265e_mmu { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +/* +&spdif { + pinctrl-0 = <&spdifm0_tx>; + status = "okay"; +}; + +&spdif_out { + status = "okay"; +}; + +&spdif_sound { + status = "okay"; +}; +*/ + +&hdmiphy { + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc_18>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + pmuio-supply = <&vcc_io>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&clk_32k_out>; + + clk_32k { + clk_32k_out: clk-32k-out { + rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>; + }; + }; + + leds { + working_led: working-led { + rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none_2ma>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none_4ma>;/*, + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none_4ma>;*/ + }; + }; + + usb2 { + usb20_host_drv: usb20-host-drv { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + uart0_gpios: uart0-gpios { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-wlan { + sdio_host_wake: sdio-host-wake { + rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + +}; + +/* +&rkvdec { + status = "okay"; + vcodec-supply = <&vdd_logic>; +}; +*/ + +&rkvdec_mmu { + status = "okay"; +}; + +&threshold { + temperature = <80000>; /* millicelsius */ +}; + +&target { + temperature = <95000>; /* millicelsius */ +}; + +&soc_crit { + temperature = <100000>; /* millicelsius */ +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart0 { + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; + + bluetooth { + compatbile = "brcm,bcm43341-bt"; + max-speed = <1500000>; + shutdown-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wakeup"; + interrupts = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + }; + +}; + +&uart2 { + /delete-property/ dmas; + /delete-property/ dma-names; + + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +/* +&u3phy { + vbus-supply = <&vcc_host_vbus>; + status = "okay"; +}; + +&u3phy_utmi { + status = "okay"; +}; + +&u3phy_pipe { + status = "okay"; +}; +*/ + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* +&usbdrd3 { + status = "okay"; +}; + +&usbdrd_dwc3 { + dr_mode = "host"; + status = "okay"; +}; +*/ + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vpu { + status = "okay"; + vcodec-supply = <&vdd_logic>; +}; + +&vpu_mmu { + status = "okay"; +}; + +/* +&vepu { + status = "okay"; +}; +*/ + +&vepu_mmu { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +/* +&rga { + status = "okay"; +}; +*/ + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&cpu0_opp_table { + + opp-1512000000 { + status = "disabled"; + }; + +}; + +&hdmi_sound { + status = "okay"; +}; + +&analog_sound { + status = "okay"; +};